How to install the Flowplan Meter

By januar 17, 2019 maj 21st, 2019 No Comments
As easy as a normal LCD meter

We have done our absolute best to make sure the installation is as easy as possible.


Install the flowmeter

It's simple. The flowmeter comes with a 3/8" threaded connection that fits directly to all standard filters. Mount the flowmeter on the filter head

Mount it!

Mount the electronics box using the supplied 3M™ tape. Ideally you want to place it in the open and as high as possible in order to get the best signal

Plug it in!

Plug the flowmeter into the electronics box. This also turns on the device, which you hear from the loud 3 second constant beep

Let it connect!

After the loud initial beep is over, the device is automatically connecting to our network. When you hear 4 short beeps, the device is connected and everything is running

That's it!

The device is now connected, and everything is as it should be. Everytime a cup of coffee is made, the device transmits the data and we process it